2m (7ft) LC UPC to LC UPC Duplex OM5 Multimode Wideband PVC (OFNR) 2.0mm Fiber Optic Patch Cable #69095

Request a quote

Specifications

Product Specification
Connector Type LC UPC to LC UPC Fiber Grade Bend Insensitive
Fiber Mode OM5 50/125μm Wavelength 850/1300nm
40G Ethernet Distance 440m at 850nm 100G Ethernet Distance 150m at 850nm
Insertion Loss ≤0.3dB Return Loss ≥30dB
Min. Bend Radius (Fiber Core) 7.5mm Min. Bend Radius (Fiber Cable) 20D/10D (Dynamic/Static)
Attenuation at 850nm 3.0 dB/km Attenuation at 1300nm 1.0 dB/km
Effective Modal Bandwidth (at 850nm) ≥4700 MHz·km Effective Modal Bandwidth (at 953nm) ≥2470 MHz·km
Fiber Count Duplex Cable Diameter 2.0mm
Cable Jacket PVC Polarity A(Tx) to B(Rx)
Operating Temperature -20~70°C Storage Temperature -40~80°C

OM5 wideband multimode bend insensitive fiber optimized for multi-wavelengths transmission systems operating in the range of 850-950nm, enabling optimal support of emerging Shortwave Wavelength Division Multiplexing (SWDM) applications that reduce parallel fiber count by at least a factor of four to allow continued use of just two fibers (rather than eight) for transmitting 40 Gb/s and 100 Gb/s and reduced fiber counts for higher speeds.

OM5 meets TIA-492AAAE and draft IEC 60793-2-10 A1a.4 requirements while completely backward compatible with existing OM4 networks and applications. It meets RoHS compliant and the fiber patch cord is optically tested for insertion loss to ensure high quality.

Quality Certifications

Smart & Reliable – Bendable Optical Fiber

The industry standard duplex fiber connector meets EIA/TIA 604-2 with ceramic ferrule for high speed cabling networks.

Bend Insensitive Fiber

BIF Cable can be stapled and bent around corners without sacrificing performance.

7.5mm Minimum Bend Radius

The bend performance improves duct utilization, enabling smaller enclosures.

Zirconia Ceramic Ferrule Optimum IL and RL

Optimum IL and RL ensure stable signal transmission, protecting your network safety.

OM5 Multimode Fiber – Ready for Next-Generation Wideband Networks

As data rates increase in the data center, OM5 wideband multimode fiber (WBMMF) will allow use of Short Wavelength Division Multiplexing (SWDM) technology to transmit multiple signals (wavelengths) on one fiber, increasing the bandwidth of a single fiber by a factor of at least four.

Reach us on WhatsApp
1